Xbox 360 Jtag - Dual Fan Mod + [Tut]

[Empty Gaming 16]

Hey guys whats up, i took a brake today from .map modding to help make my 360 cooler. So here are some pictures!

Before my CPU and GPU ran at around 150F and now CPU is 133.88F and GPU 128.84F

Tutorial, You going to want to get 2 80mm PC Fans. When you have them you will have 3 wire's and a thing at the end, so make sure you find out what your + and - wire is, and the 3rd is your fan control we wont need that. Then take your going to want to cut the end off that has the connector, now strip the wire.

Do that to the second fan.

Now find a usb cord and cut the end off that isn't the usb. Now strip the cord, you will see 3 or 4 wires a red, black, white, and green (thats what i had). Now just strip the red and black wire.

Now just twist the 3 + (Red) wires together, and 3 - (black) wires together, then put some electrical (small) tape around the + wire, then take another piece and put the - next to the + (taped) and wrap that together.

Now your done!

Notes, Make sure you have mounted the fan to the xbox and stuff before you twist the wires together, I know this isnt an easy tutorial, but i made this all with my knowledge, So if you want to know any thing else just ask it in a comment!

[elatesword 0]

Thats a nice xbox on the bottom lol, and the fans remind me of the talismoon dual fans. Nice tut and pics.

[joek 0]

This is only 5v wouldn't it be better to have them run at 12v by wiring them to the inside bc through USB it doesn't have it's full potential